SwiftLift™ Jaws™ Edge Lift Anchor System

RRP $0.00 
    • Description
    • Features
    • Documents
    • Videos

     

    Reid™ SwiftLift™ JAWS™ Edge Lift Anchors – made from Australian DNA.  JAWS Edge Lift Anchors have been designed in Australia to perform under Australian conditions, in Australian concrete, reinforced with Australian reinforcing bar and mesh.

    Compliant to  AS3850.1:2015 (+A1 2019) , JAWS offers Precasters edge lift solutions with a rated WLL across range 3t – 10t for typical concrete strengths. 

    The JAWS teeth configuration allows extremely high retention loads in concrete without the lateral bursting forces that are generated by traditional wavy leg or hairpin anchors. JAWS will offer a range of WLL’s in panels down to 100mm thick and at lower concrete strength values.

     


    Features & Benefits:

    • System colour code to minimise component selection errors.
    • Compatible with existing Reid™ clutches and void formers.
    • Eliminates concrete spalling in shear to edge and rotational lifts of thin concrete elements.
    • Rated WLL across range 3t – 10t for typical concrete strengths.
    • Range of WLL’s in panels down to 100mm thick and at lower concrete strength values.
    • Unique design reduces outward bursting loads and potential panel damage.
    • Less reinforcement required. 
    • Hot dip galvanised for maximum corrosion protection.
    File Type File Description
    Reid Clutch Discard Criteria AUS BulletinsThis discard criteria provides very important product and safety information critical for inspecting Reid™ SwiftLift™ & Edge Lifting Clutches on an ongoing basis.
    Reid_SwiftLift JAWS EdgeLift Anchors_AS3850 Compliance Doc_AUS Compliance DocumentsReid™ SwiftLift™ JAWS™ Edge Lift Anchors comply with AS 3850.1:2015 (+A1:2019
    Reid_SwiftLift Edgelift Clutches_AS3850 Compliance Doc_ AU Compliance DocumentsReid SwiftLift™ Edge Lift Clutches, from 3t to 10t WLL comply with AS3850.1:2015 (+A1)
    Reid AUS Lifting Systems Compatibility Guideline EducationalReid AUS Lifting Systems Compatibility Guideline. Reid™ SwiftLift™ Lifting Systems comply with S 3850.1:2015 (+A1:2019) Please refer to the relevant Compliance Document for further information regarding these systems
    Reid Lifting Anchors Installation Guide AUS Installation GuidesInstallation process for the Reid Lifting system product range
    RCS_Civil Market Offer Product Guide Product GuidesRCS_Civil Market Offer Product Guide
    Reid™ - Jaws Lifting System

    Reid™ SwiftLift JAWS Edge Lift Anchors – made from Australian DNA. Compliant to AS 3850.1:2015 (+A1:2019), JAWS offers Precasters edge lift solutions with a rated WLL across range 3t – 10t for typical concrete strengths. The JAWS teeth configuration allows extremely high retention loads in concrete without the lateral bursting forces that are generated by traditional wavy leg or hairpin anchors. JAWS Anchors allow for earlier lifting due to their ability to preform with lower concrete strengths. With a range of WLL’s, JAWS Anchors can be used in panels as thin as 100mm.

     Reid™ SwiftLift™ JAWS™ Lifting System - 3 Tonne

    Reid™ SwiftLift™ JAWS™ Lifting System - 3 Tonne:

    Part #Description
    SJLSwiftLift JAWS Lite Edgelift Anchor - 3t WLL
    SJLLCSwiftLift JAWS Lite Lifting Clutch
    SJLVFSwiftLift JAWS Lite Void Former
    SJLSPSwiftLift JAWS Lite Void Former Support Plate
    Reid™ SwiftLift™ JAWS™ Lifting System - 7 Tonne

    Reid™ SwiftLift™ JAWS™ Lifting System - 7 Tonne:

    Part #Description
    SJSSwiftLift JAWS Standard Edgelift Anchor - 7t WLL
    3DX85LCSwiftLift 3Dx85 Lifting Clutch
    3DX85VFSwiftLift 3Dx85 Void Former
    3DX85NPSwiftLift 3Dx85 Void Former Support Plate
    Reid™ SwiftLift™ JAWS™ Lifting System - 10 Tonne

    Reid™ SwiftLift™ JAWS™ Lifting System - 10 Tonne:

    Part #Description
    SJUSwiftLift JAWS Ultra Edgelift Anchor - 10t WLL
    SJULCSwiftLift JAWS Ultra Lifting Clutch
    SJUVFSwiftLift JAWS Ultra Void Former
    SJUNPSwiftLift JAWS Ultra Void Former Support Plate

    Featured Video

    Reid™ - Jaws Lifting System

    Reid™ SwiftLift JAWS Edge Lift Anchors – made from Australian DNA. Compliant to AS 3850.1:2015 (+A1:2019), JAWS offers Precasters edge lift solutions with a rated WLL across range 3t – 10t for typical concrete strengths. The JAWS teeth configuration allows extremely high retention loads in concrete without the lateral bursting forces that are generated by traditional wavy leg or hairpin anchors. JAWS Anchors allow for earlier lifting due to their ability to preform with lower concrete strengths. With a range of WLL’s, JAWS Anchors can be used in panels as thin as 100mm.

    View Video
    Reid™ - Jaws Lifting System

    Reid™ has been a trusted construction industry supplier for over 100 years.

    creative-services@reidconstructionsystems.com Reid construction systems 91Vz7!tq2 reidconstructionsystems.com 587 tls